Q-See QC-SERIES Quick Start Manual

Manual is about: ANALOG HD DVRS

Summary of QC-SERIES

  • Page 1

    Before you get started a: gather your components. You will need: 1. An hdmi monitor, 19” or larger vga pc monitor and vga cable or a television of any size. 2. A surge protector we strongly recommend that you use one that has the following specifications: • ul-1449 rated • clamping voltage of 330 or...

  • Page 2

    Connect the devices step 1 connect to a monitor or television step 2 connect mouse connecting a vga pc monitor 1. Plug the vga cable into the port marked “vga” on the back of the nvr. 2. Plug the other end of the vga cable into the similar port on the back of the monitor. 3. Plug the monitor’s power...

  • Page 3

    Initial set up 1. The startup wizard will launch once your nvr has booted up. Choose the language you wish the nvr to use from the pull-down menu. If you change the language, the nvr will restart allowing you to continue using the wizard in your desired language. You can click on the box next to sta...

  • Page 4

    Camera set up step 5 connecting the cameras 1. Connect one of the long ethernet cables to the socket on the wire leading from the camera. Important! If your bundle came with specialty cameras, such as a ptz, please consult the instructions for that camera first. 2. Plug the other end of the ethernet...