Qlogic 3200 Series User Manual - page 107
2–Configuring NIC
NIC Partitioning (NPAR)
SN0054671-00 B
2-61
Configure NPAR
You can use the
NIC Partition Management
tab in the device properties page to
enable NPAR and configure the 10GbE physical port into a multi-function storage
and networking port.
To set up NPAR on an 8200 and 3200 Series Adapters’ port:
1.
Log in to the server that contains installed 8200 and 3200 Series Adapters.
2.
Open the Server Manager and select
Diagnostics > Device Manager >
Network Adapters
.
3.
Right-click the first
QLogic 10 Gigabit Ethernet CNA
device and select
Properties
from the context menu (
Figure 2-39. Selecting Properties from the Context Menu
4.
From the Adapter Properties page, do the following:
a.
Select the
NIC Partition Management
tab.
b.
Right-click the function number you want to enable.