Qlogic 3200 Series User Manual - Virtual Ports (Npiv)
4–Configuring FCoE
Virtual Ports (NPIV)
4-4
SN0054671-00 B
Configuring Boot Devices with the BIOS
Refer to
for information.
Virtual Ports (NPIV)
Configuring NPIV with the QCC GUI
Refer to the
QConvergeConsole Help System: Using Virtualization (NPIV)
for
information.
Configuring NPIV with the Interactive QCC CLI
Refer to the
QConvergeConsole CLI User's Guide
for information.
Configuring NPIV with the Non-Interactive QCC CLI
Refer to the
QConvergeConsole CLI User's Guide,
“Fibre Channel Noninteractive
Commands” section
for information.
Driver Parameters
Configuring FCoE Driver Parameters with the QCC GUI
Refer to the
QConvergeConsole Help System: HBA Parameters-Viewing or
Modifying Port Parameters
for information.
Configuring FCoE Driver Parameters with the Interactive QCC
CLI
Refer to the
QConvergeConsole CLI User's Guide
for information.
Configuring FCoE Driver Parameters with the Non-Interactive
QCC CLI
Refer to the
QConvergeConsole CLI User's Guide,
“Fibre Channel Noninteractive
Commands” section for information.
Selective LUNS
Configuring Selective LUNS with the QCC GUI
Refer to the
QConvergeConsole Help System
for information.
Configuring Selective LUNS with the Interactive QCC CLI
Refer to the
QConvergeConsole CLI User's Guide
for information.