Qlogic 3200 Series User Manual - Configuring Pxe Boot
Manual is about: QConvergeConsole CLI
of
170
2–Configuring NIC
Configuring PXE Boot
SN0054671-00 B
2-3
Configuring PXE Boot
This section provides procedures for configuring the 8200 and 3200 Series
Adapters to perform PXE boot. The example uses function 1 and NIC 1.
To configure PXE boot:
1.
Enter the system BIOS by pressing the F2 key.
2.
On the BIOS window (
Integrated Devices
, and then
press the ENTER key.
Figure 2-1. Dell BIOS: Integrated Devices
3.
Set the
Embedded NIC1 and NIC2
option to
Enabled
.
4.
Set the
Embedded NIC1
option to
Enabled with PXE
.
5.
Press the ESCAPE key twice, and then select
Save changes and exit
.
The system reboots.
6.
(Optional) During POST, press the CTRL+Q
keys to enter the
QLogic 8200
Series / 3200 Series CNA Function Configuration
window.