Qlogic 3200 Series User Manual - page 58
2–Configuring NIC
QLogic Device Windows Property Pages
2-12
SN0054671-00 B
Max Jumbo Buffers
Specifies the number of jumbo-sized receive buffers
allocated for the jumbo ring (not frame).
Reg Key:
RxJumboRingSize
Default:
4096
Values:
1024, 2048, 4096, 8192
Number of Receive Buffers
Specifies the number of buffers allocated for receiving
standard MTU size (1514 byte) packets.
Registry Key:
*ReceiveBuffers
Values:
1024, 2048,4096,8192,16384,32768
Default:
16384
Number of Transmit Buffers
Specifies the number of stage buffers used by the
driver during transmit.
Registry Key:
*TransmitBuffers
Values:
1024, 2048, 4096
Default:
1024
Priority & VLAN Tag
Enables and disables support for 802.1pQ priority
tagging. This property must be enabled to set the
VLAN ID.
Registry Key:
PQTagging
Default:
Priority & VLAN Enabled
Values:
Priority & VLAN Enabled; Prior-
ity & VLAN Disabled; Priority Disabled,
VLAN Enabled; Priority Enabled, VLAN
Disabled
Receive Side Scaling
Enables and disables the RSS feature.
Registry Key:
RSS
Default:
Enabled
Values:
Enabled, Disabled
Receive Side Scaling Rings
Specifies the number of RSS rings used.
Registry Key:
MaxStatusRings
Default:
2
Values:
1-4
Table 2-1. Windows Driver Configurable Parameters (Continued)
Property
Description