QMS 1660 Operation - page 18
Loading the
Multipurpose
Tray
QMS 1660 Print System Operation
2-6
7
If necessary, install the cassette rear cover(s).
If you’re using one or more 11" x 17"/A3 or legal/B4 paper cas-
settes and the cassette rear covers aren’t installed, install them
now.
Loading the Multipurpose Tray
Use the multipurpose tray to print on label stock, odd-sized paper,
and transparencies. The multipurpose tray is also especially useful if
you want to print on a single sheet of letterhead or colored paper with-
out changing the paper in the paper cassette.
This section explains how to load print media in the multipurpose tray.
For tips on how to get the best possible printing results from media
other than paper, see “Envelopes: Special Considerations,” “Labels:
Special Considerations,” “Letterhead and Memo Paper: Special Con-
siderations,” and “Transparencies: Special Considerations,” at the
end of this section.
»
Note:
A
PAPER SIZE MISMATCH
error can be caused if the media in
the multipurpose tray is not the media size selected for the
multipurpose tray (inputbin 1). If the printer supports the media size
you want, insert the correct size media in the multipurpose tray. If the
printer does not support the media size you want, select the universal
media size to clear the error. See “Media Size” in chapter 4, “Printer
Configuration,” of the Reference for more information on
multipurpose size.