QMS 1660 Operation - page 73
Testing PC-
Printer
Communication
6-17
Troubleshooting
* Baud rates of 19200 and 38400 require that both RTS and CTS
hardware flow control ((Administration/Communications/Serial/Hdwe
Flow Ctl menu) be selected. These baud rates do not support XON/
XOFF software flow control )Rcv Sw Flow Ctl).
3
Next
access the Administration
menu.
CONFIGURATION
ADMINISTRATION
4
Select
enter the Administration
menu.
ADMINISTRATION
COMMUNICATIONS
5
Select
enter the Communications
menu.
COMMUNICATIONS
TIMEOUTS
6
Next
access the Serial menu.
COMMUNICATIONS
SERIAL
7
Select
enter the Serial menu.
SERIAL
MODE
8
Next
access the Baud Rate menu.
SERIAL
BAUD RATE
9
Select
enter the Baud Rate menu.
BAUD RATE
*9600 BAUD
10
Next (one or
more times)
display the correct baud rate.*
BAUD RATE
# BAUD
11
Select
select the displayed baud
rate.
#
IS SELECTED
SERIAL
BAUD RATE
12
If you need to change other settings, press the Next key to access
the appropriate menu, then repeat steps 9-11 to find and select the
new settings.
13
Online/Offline
Access the Save Changes
menu.
SAVE CHANGES?
NO
14
Next
Access the Yes option.
SAVE CHANGES?
YES
15
Select
Save your changes.
IDLE
16
Online/Offline
Put the printer back on line
(the Online/Offline indicator
lights).
IDLE