QMS 1660 Operation - page 89
General Print
Quality
Problems
6-33
Troubleshooting
General Print Quality Problems
Print quality problems are those related to the appearance of the pages
you print. They include white lines on the page, uneven blacks, and
other print distortions.
If you have problems with the quality of your printed pages, try this
quick check procedure:
1
Make sure the Conserve Toner option (Administration/Engine/
Conserve Toner) is off.
2
Check the print density adjustment dial on the inside of the
printer. Change the setting, and try printing another page.
3
If the
TONER OUT
message is on, replace the toner cartridge.
4
Remove the toner cartridge and rotate it several times. The toner
can settle, and this procedure redistributes the toner. Reinsert the
cartridge and try printing again.
5
Place a service call to your QMS vendor.
Specific Print Quality
Problems
Listed below are several print quality problems with possible solutions.
Try the solutions in the sequence given. If the solutions listed do not
solve the problem, place a service call to your QMS vendor.
Black Image (Entire Page)
1
Install a new toner cartridge.
2
Contact your QMS vendor.