QMS 1660 Operation - page 65
Status
Messages
6-9
Troubleshooting
The following status messages may appear in the message window:
This message...
means...
Do this...
x ACTIVE JOBS
The printer is on line.
x
identifies the number of jobs in
process.
ADJUST
INPUTBIN BIN
A cassette is not inserted
correctly.
INPUTBIN identifies
the cassette.
Adjust the cassette.
CANCELLING JOB
The Cancel key has been
pressed, and the oldest job in
the print queue is being
cancelled.
CLOSE ENGINE
DOOR(S)
The front cover of the printer is
open.
Close the front
cover completely.
IDLE
The printer is on line, but no
jobs are in process.
INPUT IDLE
PRINTING
The printer is on line and
printing jobs already in the
queue. No new jobs are arriving
at the communication
interfaces.
INITIALIZING
The printer is getting ready to
go on line.
PAPER JAM
Media has jammed while being
pulled from a cassette or tray,
passing through the printer, or
exiting into the output tray.
PAPER SIZE
MISMATCH
The media size selected for the
multipurpose tray is not the size
currently in the tray.
If the printer sup-
ports the media
size you want,
insert it in the multi-
purpose tray. If the
printer doesn’t sup-
port the media size
you want, select
universal as the
media size. See
“Media Size” in
chapter 4, “Printer
Configuration,” of
the
Reference for
more information.