Quadra-Fire SANTAFEI-MBK Installation Manual - page 19
June 5, 2017
7019-230G
19
Santa Fe Pellet Insert
Figure 19.1
Grille Bracket Cover
(shipped flat from factory)
Finger bend into position
after grilles are installed
on appliance
Insert heat exchanger rods
through holes on second grille.
Heat Exchanger
Rods
Install bottom 3 grilles before
installing single top grille
Install in flat position
Bend after grilles installed
C. Optional Grille Removal and Installation
Included in Kit: (4)lowergrilles;(3)uppergrilles,(1)
uppergrille;(4)grillebracketcovers;fasteners
Tools Required: #2Phillipsheadscrewdriver
1. Openthedoor.Removethetop2screwsoneachside
ofuppergrilleandremovethesinglegrille.Removethe
bottom2screwsoneachsideandremovethe3grilles
attachedtogether.
2. Removing the ash drawer before taking off the lower
grillewillmakethelowergrilleeasiertoremove.Usinga
Phillipsheadscrewdriver,removethe2screwsoneach
sideandpullforwardwithadownwardmotiontoavoid
catchingthegrilleonthefirepotpullrod.
NOTE: The plated grilles, Nickel, Black Nickel and
Gold, have 4 black grille bracket covers to eliminate
the brightness of the bracket plating. The bracket
covers are shipped flat, installed on the grilles, and
after the grilles are installed on the appliance they
are then finger-bent into position.
4. Attachthe4grillebracketcoverstothelower4grillesand
thetop3grilles.Slipthemetalstripsthroughthegrille
openingsandsecuretogrillewithscrewsprovided.Do
notfingerbendthecoverbracketsatthistime.
5. Securethelowergrilletotheappliancewith2screwson
eachside.Fingerbendthebracketcoversaroundthe
platedbrackets.
6. Theuppergrillehas2separateparts.Installthe3grilles
attachedtogetherfirst.Anglethegrillesdownwardand
inserttheheatexchangercleaningrodsthroughtheholes
inthesecondgrilleandthentwistforwarduntilhorizon-
tallylevel.Attachthegrillewithonlythebottom2screws
oneachsideofgrille.Donotfingerbendthecoverbrack-
etsatthistime.
7. Positionthesingletopgrilleoverthe3alreadyinplace.
Attachwithonescrewoneachsidethroughthetopgrille
andtheother3grillestosecuretoappliance.
8. Fingerbendthebracketcoversontheuppergrilleinto
place.
9. Re-installtheashdrawer.
D. Door Handle Removal
Tools Required: 5/32Allenwrench
1. Openthedoor.Usinga5/32Allenwrench,loosenset
screwbyacoupleofturns,butdonotremove.
2. Pushthepincompletelyoutandremovethehandle.
3. Re-installinreverseorder.
E. Door Removal
1. Removethedoorhandleandface.Followinstructions
fromDabove.
2. Thedoorcannowbeliftedoffthehinges.
3. Re-installinreverseorder.