Quadra-Fire SANTAFEI-MBK Installation Manual - page 5
June 5, 2017
7019-230G
5
Santa Fe Pellet Insert
WARNING
Hearth&HomeTechnologiesdisclaimsany
responsibilityfor,andthewarrantywillbevoided
by,thefollowingactions:
•Installationanduseofanydamagedappliance.
•Modificationoftheappliance.
• InstallationotherthanasinstructedbyHearth&Home
Technologies.
• Installation and/or use of any component part not
approvedbyHearth&HomeTechnologies.
• Operating appliance without fully assembling all
components.
• Operatingappliancewithoutlegsattached(ifsupplied
withappliance).
• DoNOTOverfire
Or any such action that may cause a fire hazard.
ReciprocatingSaw
ChannelLocks
Hammer
PhillipsScrewdriver
TapeMeasure
PlumbLine
1/4”Self-TappingScrews
FramingMaterial
Hi-tempCaulkingMaterial
Gloves
SafetyGlasses
FramingSquare
ElectricDrill&Bits(1/4”)
Level
Mayalsoneed:
VentSupportStraps
VentingPaint
Tools and building supplies normally required
for installation, unless installing into an existing
masonry fireplace:
C. Tools And Supplies Needed
B. Thermostat Wall Control Location
The thermostatwallcontrol’slocationwillhavesomeaffect
on the appliance’soperation.
• Maximumwirelengthfromapplianceis100feet(30.48m)
continuousnon-splicedwire.Recommended20gauge
wire,solidcopper
.
•
When located close to the appliance, it may require a
slightlyhighertemperaturesettingtokeeptherestofthe
housecomfortable.
•
Whenlocatedinanadjacentroomoronadifferentfloor
level,youwillnoticehighertemperatures near the appli-
ance.
D. Inspect Appliance and Components
•
Opentheapplianceandremoveallthepartsandarticles
packedinsidetheComponentPack.Inspectalltheparts
andglassforshippingdamage.
• Reporttoyourdealeranypartsdamagedinshipment.
•
Alllabelshavebeenremovedfromtheglassdoor.
• Platedsurfaceshavebeenwipedcleanwithasoftcloth,
ifapplicable.
• Read all the instructions before starting the installation.
Follow these instructions carefully during the
installation to ensure maximum safety and benefit.
• Follow pipe manufacturer instructions for installation
and air clearance requirements.
WARNING
Fire Risk.
Damagedpartscouldimpairsafeoperation.Do
NOTinstalldamaged,incompleteorsubstitute
components.