Tait TP9300 User Manual - Dialing A New Network
Operating in trunked mode 53
The radio will restart, and display a power-up
message followed by the name of the new
network.
Dialing a new network
This feature is only available for radios with
alphanumeric keys.
1
Dial
*700#
to display the name of the current
trunked network.
2
Dial
*70n#
to change to a new network, where
n
is
the number of the new network (1 to 4).
The radio will restart, and display a power-up
message followed by the name of the new
network.
Making a preset call
The preset calls programmed for your radio may be to
other radios, to PABX extensions or to PSTN
numbers.
1
Select
Menu
>
Preset calls
.
(Depending on how your radio is programmed, you
may be able to use a function key, or left selection
key to select the Preset Calls menu.)
2
In the Preset Calls menu, scroll through the list of
calls until the call you want appears, then press
Send
.
While the call is being setup, you can cancel the
call by pressing
Clear
.
Select
Back
Main menu
Preset calls
Set zone