Tait TP9300 User Manual - Dialing A Preset Call
54 Operating in trunked mode
Dialing a preset call
This feature is only available for radios with
alphanumeric keys.
The preset calls programmed for your radio can be
dialed if you know the number associated with the
preset call.
1
Dial
p
, where
p
is the number of the preset call.
If your preset call number is the same as a call to
another radio, then you need to dial a leading
0
.
For example, dial
23#
to call radio 23 and dial
023#
for preset call number 23.
2
Press
Send
or the
#
or PTT key.
While the call is being setup, you can cancel the
call by pressing
Clear
.
About trunked zones and
workgroups
Trunked zones and workgroups are used to manage
the calls on the trunked system. Zones typically define
geographic areas (towns, suburbs or counties), or
branches of an organization. Workgroups span
multiple zones, and typically define functions, work
areas or job roles.
When your radio belongs to a workgroup, it is said to
be ‘subscribed’, and you receive all calls directed to
that group of users. A group’s members are dynamic,
in that a group only contains radios that are currently
registered on the system and subscribed to the
same group.
23
Send
Clear