Tait TP9300 User Manual - Ending Active Calls
Operating in conventional mode 89
The message
Low power tx activated
appears
briefly, and the low-power transmit icon appears
in the display.
2
Press the low-power transmit function key again to
turn low-power transmit off, and the message
Low
power tx deactivated
appears in the display.
Ending active calls
You may have a function key programmed to either
end the current call, or end the current call and all
other active calls in your group. This can be done
either by:
■
using the function key programmed for reset mon-
itor to end your current call,
■
using the function key programmed for call clear-
down to end your current call and all other calls in
your group, or
■
using the function key programmed for both reset
monitor and call cleardown.
Using a function key to end your current call
■
Press the function key programmed for reset mon-
itor. The radio’s monitor is turned off, ending your
current call.
The LED stops flashing green, and the monitor
icon disappears from the display.
Using a function key to end all active calls
■
Press the function key programmed for call clear-
down and monitor is turned off for all radios in
your radio group.
The LED stops flashing green, and the monitor
icon disappears from the display.