Tait TP9300 User Manual - Accessing The Call Queue
Operating in trunked mode 63
In the example below, the last call received was a
status message from Car 1. This call is the first of
three calls stored in the call queue.
Accessing the call queue
1
Use the scroll keys to move through the calls in the
call queue until the call you want appears.
2
Press
Options
to open the call options menu.
The options available for the call depend on the
type of call it is. If the call is a voice call, select
Call
to return the call or
Delete
to delete the call.
If the call is a status message or a text message,
then select
View
to read the message.
Changing your call queuing setting
Your radio may be programmed so that you are able
to change call queuing to ‘unanswered’. Unanswered
call queuing means that all status and text messages
are immediately queued. Incoming voice calls are only
queued if they are unanswered.
If your radio has alphanumeric keys, you may be able
to change your call queuing setting using the keypad.
To activate call queuing:
■
select
Menu
>
Radio settings
>
Call
settings
>
Call queuing
and choose
On
,
■
press the function key programmed for Call queu-
ing, or
■
dial
*48
then press the
or PTT key.
identity of last
unanswered
scroll through
the calls
type of call
position of call
in the call queue
options
available
depend on type
queued calls