Tait TP9300 User Manual - Selecting A Zone
Operating in trunked mode 55
Your radio may be programmed to use different
names for a ‘zone’ and ‘workgroup’. For
example, ‘district’ or ‘area’ may be used in place
of zone, and ‘role’ or ‘group’ may be used in
place of workgroup.
Selecting a zone
1
Select
Menu
>
Set zone
.
(Depending on how your radio is programmed, you
may be able to use the scroll keys, left selection
key or channel selector to select a zone.)
2
In the Set Zone menu, scroll through the list of
zones until the zone you want appears.
3
Press
Select
.
4
Check that the network icon
appears in the
display.
Selecting a workgroup
1
Select
Menu
>
Set workgroup
.
(Depending on how your radio is programmed, you
may be able to use the scroll keys, left selection
key or channel selector to select a workgroup.)
2
In the Set Workgroup menu, scroll through the list
of workgroups until the workgroup you want
appears.
3
Press
Select
.
4
Check that the network icon
appears in the
display.
Select
Back
Main menu
Set zone
Set workgroup
Select
Back
Main menu
Set workgroup
Go to homegroup