Tait TP9300 User Manual - Sending A Text Message
Operating in trunked mode 69
Sending a text message
1
When you have chosen or entered a message,
press
Options
and the Text Options menu opens.
2
In the Text Options menu, scroll through the list of
options until the choice you want appears.
(If your radio has alphanumeric keys, you may be
able to dial the number of the party you wish
to call.)
3
Press
Select
.
The call details appear in the display. While the call
is being setup, you can cancel the call by
pressing
Clear
.
Placing the radio in
do-not-disturb mode
If you do not want calls for a while, you can place the
radio in do-not-disturb mode, so that incoming calls
can be ignored. You can make outgoing calls in the
usual way.
While do-not-disturb mode is active, incoming
calls cannot be stored in the call queue.
Using a function key
1
Press the function key programmed for do not
disturb, to activate the do-not-disturb function.
The message
Do not disturb activated
appears
in the display. Your radio will now ignore all
incoming calls.
2
To deactivate the do-not-disturb function, press
the do-not-disturb function key again.
Select
Back
Text options
Send
Cancel sending