Tait TP9300 User Manual - Scanning Workgroups
Operating in trunked mode 57
The homegroup icon only appears if you use a
function key to select your homegroup.
Scanning workgroups
The ‘My Workgroups’ list comprises the current
workgroup, the homegroup, and other programmed
groups. When scanning is active, the radio will receive
activity from any subscribed groups in the My
Workgroups list.
To activate scanning:
1
Select
Menu
>
Scanning
.
(Depending on how your radio is programmed, you
may be able to use a function key to select
scanning.)
2
Scroll to
On
(or
Off
) and press
Select
.
About emergency operation
In an emergency you may be able to summon help by
sending an emergency call. After making the call, your
radio may be programmed to enter emergency mode.
While emergency mode is active, your radio may
cycle between receive and transmit, so that your
dispatcher or the called party can hear any activity
near your radio.
On most networks, an emergency call takes
precedence over other call types, and existing calls
are cleared down so that the emergency call can
proceed.
To make an emergency call from your radio, you may
be able to either:
■
make a preset emergency call,
Select
Back
Main menu
Scanning
Send