Tait TP9400 User Manual - Low Power Tx.
112 Customizing radio settings
Extending battery life on a shift
You can reduce the power consumption of your radio
(and thereby extend the life of the battery during a shift)
in the following ways:
■
Transmit at low power (if your radio is not already
configured to do this).
■
Ensure that backlighting automatically turns off
when no radio activity is detected (see
Turning low power transmit on or off
If you are using your radio in conditions where signal
strength is high, you can extend the shift life of your
battery by transmitting at low power.
When low power transmit is turned on, appears in
the display and calls are made at low power rather than
at the programmed power setting.
To turn low power transmit on or off for all channels:
1
Press Menu and select Radio settings > Functions >
Low power tx.
(Depending on how your radio is programmed, you
may be able to press a function key to turn low power
transmit on or off.)
2
Scroll to On (or Off) and press Select. (The current
setting is highlighted.)
The message Low power tx activated
(or deactivated) appears in the display.
Select
Back
Low power tx
Off
On