Tait TP9400 User Manual - Vehicles
18 For your safety
Electromagnetic compatibility in European
vehicles
In the European Community, radio equipment fitted to
automotive vehicles is regulated by Directive 72/245/
EEC and its amendments. The requirements of this
directive cover the electromagnetic compatibility of
electrical or electronic equipment fitted to automotive
vehicles.
Unapproved modifications or changes
to radio
The radio is designed to satisfy the applicable
compliance regulations. Do not make modifications or
changes to the radio that are not expressly approved
by Tait. Failure to do so could invalidate compliance
requirements and void the user’s authority to operate
the radio.
Attaching of labels
Warning
Do not obstruct the vent hole on the battery
or the vent hole on the radio chassis label. If the vent on
the battery is obstructed, the battery may explode,
causing personal injury and/or damage to property. If
the vent on the radio is obstructed, audio quality and/or
key function may deteriorate and radio seals may be
damaged.
Caution
Tait recommends that you do not affix
additional labels to the surfaces between the radio
chassis and the battery. The fit between these surfaces
is intentionally firm and any added thickness will
damage the points of attachment between radio and
battery. If you must attach a customized label, use only
a thin gummed paper label applied to the bottom 25% of
the radio chassis label and/or to the top 25% of the
battery label. Do not obstruct the vent holes (see
Warning above). Do not allow the paper label to extend
beyond the recessed label area or to conceal relevant
product information.