Tait TP9400 User Manual - page 62

62  Operating in conventional mode

Suspending a channel from a scan group

If a member channel of a scan group is busy for a long 

time and you do not want to hear the conversation, you 

may be able to use the function key programmed for 

nuisance delete to temporarily delete it from the scan 

group. When the scan group is next selected, or after the 

radio has been turned off and then on, the deleted 

channel is again part of the scan group.

To remove a channel from a scan group:

1

Wait until the radio has stopped on the channel that 

you want to remove from the scan group.

2

Press the function key programmed for 

nuisance delete.

If the channel has been removed successfully, the 

message Channel nuisance deleted appears in the 

display.

The channel remains removed from the scan group 

until you either select another scan group or the 

radio is turned off and then on again.

The function key programmed to activate scanning may 

be programmed so that a short key press activates 

scanning and a long key press activates nuisance delete.

Channel 

nuisance 

deleted