Tait TP9400 User Manual - page 71
Operating in P25 trunking mode 71
To remove a channel from a talkgroup scan group:
1
Wait until the radio has stopped on the talkgroup
that you want to remove from the talkgroup scan
group.
2
Press the function key programmed for
nuisance delete.
If the talkgroup has been removed successfully, the
message Channel nuisance deleted appears in the
display.
The talkgroup remains removed from the talkgroup
scan group until you either select another talkgroup
scan group or the radio is turned off and then on
again.
The function key programmed to activate talkgroup
scanning may be programmed so that a short key press
activates scanning and a long key press activates
nuisance delete.
Editing a talkgroup scan group
You can use the Edit Group menu to view group
membership details and make permanent changes to
your radio’s talkgroup scan groups, if your radio is
programmed in this way.
Select and edit a talkgroup scan group in the same way
as a conventional scan group. See
.
When operating on a P25 trunked system, each channel
on a conventional system represents a talkgroup.
Channel
nuisance
deleted