Tait TP9400 User Manual - Receiving A Two-Tone Call
54 Operating in conventional mode
Receiving a two-tone call
This feature is available for analog channels only.
Two-tone signaling is used to call either individual or
groups of radios. When your radio receives a two-tone
call that it can decode, it beeps, indicating which type of
two-tone call has been received.
■
One long beep: a two-tone individual call has been
received.
■
Two medium beeps: a two-tone group call has been
received.
■
Three short beeps: a two-tone super group call has
been received. A super-group call is addressed to all
radios in the fleet.
To accept the call, press the PTT key and begin
speaking.
Overriding two-tone signaling
You can override two-tone signaling using a function
key, if your radio is programmed in this way.
■
Press the function key to override two-tone
signaling on a channel, and hear all two-tone calls.
The message Ignore two-tone activated
(or deactivated) appears in the display.