Tait TP9400 User Manual - Scan Group

70  Operating in P25 trunking mode

Scanning a group of talkgroups

The scan feature is used to monitor a group of trunked 

talkgroups for activity. Each group of talkgroups is 

programmed as a single scan group.

When there is a call from a member of the talkgroup scan 

group, the radio unmutes and you can hear the call. Calls 

from talkgroups programmed as ‘priority’ talkgroups, 

take precedence over those from a non-priority 

talkgroup.

While the radio is scanning for activity, 

 appears in the 

display. When the radio stops on a talkgroup where there 

is activity, the 

 icon flashes.

Activating talkgroup scanning

Talkgroup scan is turned on using a programmed 

function key. When the function key activates talkgroup 

scan, the currently selected talkgroup automatically 

becomes a member of the talkgroup scan group.

To turn talkgroup scan on:

■

Press the function key.

Suspending a channel from a talkgroup 

scan group

If a member channel of a talkgroup scan group is busy 

for a long time and you do not want to hear the 

conversation, you may be able to use the function key 

programmed for nuisance delete to temporarily delete 

the talkgroup from the scan group. When the talkgroup 

scan group is next selected, or after the radio has been 

turned off and then on, the deleted talkgroup is again 

part of the talkgroup scan group.

Talkgroup 2

Zone 11

Menu