Tait TP9400 User Manual - Led Behavior

 Charging and caring for batteries  123

LED behavior

If there is a battery in the charger when power is 

supplied to the charger, the LEDs behave as follows:

If the charger does not behave as expected:

■

Make sure the radio or battery is seated properly in 

the charger.

■

Check that the charger is properly plugged in.

■

Check that the battery and charger contacts are 

clean. To clean, wipe the contacts with a dry lint-free 

cloth to remove any dirt, oil or grease.

LED Meaning

briefly

The charger has been connected to a power 

supply.

steady

The battery is charging.

steady

Charging complete. Remove the battery, or 

leave it in the charger.

steady

■

The battery temperature is outside the 

normal charging range. Charging will 

start or resume once the temperature is 

within normal limits. No action is 

required.

■

There is a fault. Contact your local 

regional Tait office.

all off

There is a fault. Contact your local regional 

Tait office.