TallyGenicom 6306 Maintenance Manual - page 27
Chapter 2. Menu Operations
21
2.2.3 Printer Information Printouts and Displays
There are fifteen printouts and displays accessible through the printer control panel. The first
printout is the Help menu and the rest are Printer Reports (Current Config, All Configs, Configs 1-
10, Calibrations, Last Fault, and Version). These reports can be accessed via the Configuration
menu, Printer category, under the Report parameter.
2.2.3.1 Help Menu
The Help menu is a printout that lists selections that are available for each parameter in the
multilevel menus on the printer and indicates with an asterisk (*) which ones are currently active.
CAUTION: Before printing out the Help menu, make sure that there are at least 13
inches of printable width on the installed paper.
Printing a HELP Menu In Tech Access Mode
Step 1.
Place the printer Offline.
Step 2.
Press the LF and ENTER keys simultaneously until the printer alarm sounds, then
release them to place the printer in Tech Access Mode.
Step 3.
Press the MENU Key to ENTER the multilevel menu system, then scroll (▲Keys)
to the Help menu.
Step 4.
Press ENTER to begin printing the Help menu.
This printout will end when the entire Help menu is printed out.