TallyGenicom 6306 Maintenance Manual - page 72
Other manuals for 6306:
Quick Start Manual, Specifications, Operator's Manual, Operator's Manual, Installation Instructions Manual, Brochure, Specifications
of
175
6300 Series Maintenance Manual
66
4.11 Removing the Platen Motor and Sensor PCA
1. Unplug the Sensor and Drive cables from the assembly.
2. Loosen the two set-screws on opposite sides of the platen that mount the platen to the
motor shaft.
CAUTION: Do not totally remove the set screws to prevent them from
falling into the mechanism.
Loosen Screw s