TallyGenicom 6306 Maintenance Manual - page 67
Other manuals for 6306:
Quick Start Manual, Specifications, Operator's Manual, Operator's Manual, Installation Instructions Manual, Brochure, Specifications
of
175
Chapter 4. Removing and Replacing Components
61
5. Release the grip ring at the left end of the tractor drive shaft (the square shaft) and
move it toward the center of the shaft.
Grip Ring
E-ring
6. Slide the square shaft as far left as possible.
7. Remove the coupling from the square tractor shaft / paper motor shaft – careful not
to drop the screws.
8. Remove the ‘e-ring’ at the left end of the round shaft of the paper drive assembly
(see illustration above).
CAUTION: The support bearing for the round shaft is a pressed-in nylon
bearing. Hold this bearing in place with a long-nose pliers or
similar tool while the round shaft is moved through it.