Verint Nextiva S1100w User Manual - page 45
Other manuals for Nextiva S1100w:
User Manual
Manual is about: wireless video transmitters
of
113
Verint Video Solutions
29
Nextiva S1100w User Guide
The following power-up conditions on the system status LED are abnormal:
LED not lit—Check the power supply and cabling. If power is available and the LED
stays off, call Verint Video Solutions customer service for assistance.
Steady red LED persisting more than 10 seconds—There is an internal error that
prevents the device from starting normally. Power down the device, wait 30 seconds,
then power it up. If the condition persists, call Verint Video Solutions customer service.
Flashing green-red LED not during a firmware update—The device requires a new
firmware with a serial connection.