Verint Nextiva S1100w User Manual - Establishing A Connection
Other manuals for Nextiva S1100w:
User Manual
Manual is about: wireless video transmitters
of
113
Verint Video Solutions
69
Nextiva S1100w User Guide
3. Select the S1100w, then click Telnet.
The main menu of the CLI appears.
4. Select Advanced, then Serial Port (IP), then Motion Track Serial Port.
5. Select the Remote IP Address parameter, then enter the IP address of the host
computer.
6. Go back to the main menu.
7. Save the settings, then exit the CLI.
8. Reboot the device.
Establishing a Connection
To test the serial port setup and prepare the configuration of the DVMD module, you create
a connection in the ManagerNET application. You can find this application on the Utilities
CD. You have to copy the
ManagerNET.exe
file to the hard disk of the host computer.
To create a connection for the DVMD module:
1. Power up the S1100w device.