Verint Nextiva S1100w User Manual - Getting Started
4: Setting Parameters with the CLI
32
Verint Video Solutions
Getting Started
You can access the CLI with:
A serial connection and the SConfigurator utility
A network connection and the Telnet utility (see Appendix E on page 55)
The SConfigurator console enables you to easily access the CLI to configure and customize
your S1100w device.
To access the CLI with the SConfigurator console:
1. Connect the S1100w device to a COM port of the computer using the DB-9 connector of
the CAB9P cable.
2. Start SConfigurator.
The SConfigurator window appears.
3. From the General tab, click Console.
The Verint Console window appears.
4. In the Connect using list, select the COM port used to communicate with the device.
5. Click Connect.
The CLI main menu appears.
The CLI has a timeout that is triggered after three minutes of inactivity. When the
timeout occurs:
You lose access to the command line.
The “Thank you for using the Verint Video Solutions CLI” message appears at the
command line.
The Verint Console window becomes disabled.
The Disconnect button switches to Connect.
6. To reactivate the CLI after a timeout, click Connect.