Verint Nextiva S1100w User Manual - System Status
Other manuals for Nextiva S1100w:
User Manual
Manual is about: wireless video transmitters
of
113
4: Setting Parameters with the CLI
40
Verint Video Solutions
System Status
The system status information indicates the current values of internal S1100w parameters,
including the firmware version.
Advanced
The Advanced menu holds a series of advanced setups mainly used by Verint Video
Solutions technical support. Some of these parameters are available through SConfigurator
or a video management software.
Identifying a Device
To recognize an S1100w among a large set of devices, you can make its LED flash red
rapidly.
To identify an S1100w device:
1. From the main menu, choose Advanced, then press Enter.
2. Enter i to make the LED flash red. Re-enter i to set the LED to its previous state.
3. Enter p until you are in the main menu.
4. Enter q to exit.