Wacker Neuson LTV6K Operator's manual - Ltv
wc_si001039gb_FM10.fm
23
LTV
Labels
A
See Operator’s Manual for light fixture information and troubleshooting.
BEFORE STARTING THE ENGINE:
1. Check levels of:
■
Engine oil
■
Fuel
■
Coolant
2. Move the circuit breakers to the OFF position.
TO START THE ENGINE:
1. On the engine control panel, turn the key switch to the PREHEAT position; the indicator light will
illuminate during preheating.
2. When the PREHEAT indicator light goes out, turn the key switch to the START position for a
maximum of 15 seconds.
3. When the engine is running, move the circuit breakers to the ON position.
TO SHUT DOWN THE MACHINE:
1. Move the circuit breakers to the OFF position.
2. Turn the key switch to the OFF position to stop the engine.
B
NOTICE
Lifting point
C
Insert jack locking pin before extending jack.
D,E
Fork lift pocket
Tie-down point
F
WARNING
Avoid crushing area.
177123
5100031248