Wacker Neuson LTV6K Operator's manual - Machine Setup
wc_tx004430gb_FM10.fm
40
Machine Setup
LTV
4.5
Refueling the Machine
Requirements
■ Machine shut down
■ Engine cool
■ Machine/fuel tank level with the ground
■ Fresh, clean fuel supply
Procedure
Perform the procedure below to refuel the machine.
1. Remove the fuel cap (a).
2. Fill the fuel tank, allowing a minimum of 50 mm (2 in.) expansion space between
the fuel level and the top of the tank.
3. Re-install the fuel cap.
Result
The procedure to refuel the machine is now complete.
WARNING
Fire hazard. Fuel and its vapors are extremely flammable. Burning fuel can cause
severe burns.
► Keep all sources of ignition away from the machine while refueling.
► Refuel only when the machine is outdoors.
► Clean up spilled fuel immediately.
wc_gr01374
D
D
a
50 mm
(2 in)
CAUTION
Fire and health hazard. Fuel expands when heated. Expanding fuel in an over-filled
tank can lead to spills and leaks.
► Do not fill the fuel tank completely.