WEICHAI WD10 Service Manual - page 129
of
163
Service Manual for WD10 Diesel Engine
119
41113 Steps to Assemble Engine Accessory System
Assembly of generator module
(1) Place the generator on generator support, loose-fit it on the support and draw-in rod with fixing
bolts.
(2) Install generator poly V-belt.
(3) Adjust the location of generator and tension the poly V-belt with the draw-in rod, tighten
generator fixing bolts and nuts, as shown in Fig. 4-80.
Fig. 4-80 Assembly of generator module
Assembly of A/C compressor module
(1) Place the compressor on compressor support, loose-fit it on the support and draw-in rod with
fixing bolts.