WEICHAI WD10 Service Manual - page 67
Service Manual for WD10 Diesel Engine
57
4334 Steps to Assemble Engine Front Cover
Assembling steps are contrary to disassembling ones.
434 Disassembly, Inspection, Maintenance and Assembly of Gear Housing
4341 Exploded View of Gear Housing
Hexagon flange bearing
surface toothed bolt
Hexagon plug
Compound gasket
Cylindrical pin
O-shape seal ring
Seal ring
Timing gear housing
Fig. 4-23 Exploded view of gear housing
4342 Steps to Disassemble Gear Housing
(1) Remove fastening bolts of gear housing (key point 1);
(2) Remove the plug and compound gasket;
(3) Remove intermediate gear shaft (refer to section 456);
(4) Remove engine oil pump intermediate gear shaft and engine oil pump intermediate gear bolts
(refer to section 493);
(5) Remove gear housing (key point 3);
(6) Remove seal ring (key point 2).