WEICHAI WD10 Service Manual - page 63
Service Manual for WD10 Diesel Engine
53
Key point 2:
Assembling:
Apply clean lubricating oil on crankcase bearing surface and thread of main bearing bolts, and then
tighten them according to following order:
Tightening torque
265±25Nm
Key point 3:
Assembling:
Tighten cylinder cover auxiliary bolts according to the following order, cylinder cover auxiliary
bolts are allowed to use twice at most.
Key point 4:
Assembling:
Cylinder sleeve should be checked for crack carefully before assembling, and clean up the cylinder
sleeve, press it into cylinder hole with dedicated tool, apply molybdenum powder on cylinder sleeve
external surface before the press-in process.
4314 Steps to Assemble Engine Block Assembly
Assembling steps are contrary to disassembling ones.