WEICHAI WD10 Service Manual - 22 Daily Maintenance
Service Manual for WD10 Diesel Engine
12
Loctite 277
Used for the seal
between core and
hole
Other bowl type plugs
Loctite 270
Used to seal top end
face
of
cylinder
cover
Pushrod bush
-
Cylinder cover
Loctite 518
(Renewed
product of
510)
Apply on shining
metallic surface for
sealing
Fitting surface between cylinder block and
crankcase, fitting surface between engine block
and engine front cover
Rear end face and flywheel connecting board
Fitting surface between engine oil filter seat and
crankcase
Water pump rear cover-engine block front end
face
Flywheel connecting board-flywheel housing
Fitting surface between cylinder block and
engine oil cooler cap
Fitting surface between cylinder block and
engine oil filling port cover plate
22 Daily Maintenance
221 Check Coolant Level and Temperature
Check the coolant level through the glass window, Open the filler cap to add coolant if it is
insufficient.
ATTENTION: Press down exhaust button in advance before open the filler cap to avoid
injury caused by hot coolant.
Fig. 2-2 Check coolant level and temperature