WEICHAI WD10 Service Manual - page 46
Service Manual for WD10 Diesel Engine
36
42 Cylinder Cover Assembly
421 Disassembly and Assembly of Cylinder Cover Assembly
4211 Exploded View of Cylinder Cover Assembly
Cylinder cover is located on top of cylinder block, combustion chamber is jointly formed by
cylinder cover and piston head. Parts that connected with cylinder cover are intake pipe, exhaust
pipe, water outlet pipe, EVB oil pipe, injector, cylinder cover shield, oil-gas separator, cylinder
cover gaskets and parts of valve mechanism. As shown in Fig. 4-2
Intake pipe
Nut
Valve
Exhaust pipe
Water outlet pipe
Cylinder
cover shield
Cylinder cover shield gasket
Cylinder cover
Injector
Clamping
block
EVB oil pipe
Cylinder
cover gasket
Cylinder cover auxiliary bolt
Cylinder block
Rocker seat, rocker and valve springs
Cylinder cover main bolt
Oil-gas separator
Valve rod sealing cartridge
Front hanger plate
Rear hanger plate
Fig. 4-2 Exploded view of cylinder cover assembly
4212 Steps to Disassemble Cylinder Cover Assembly
(1) Remove exhaust pipe, refer to disassembly of air intake and exhaust system for details;
(2) Remove intake pipe, refer to disassembly of air intake and exhaust system for details;
(3) Remove oil-gas separator;
(4) Remove water outlet pipe;
(5) Remove front and rear hanger plates;