WEICHAI WD10 Service Manual - page 73
Service Manual for WD10 Diesel Engine
63
4374 Steps to Assemble Piston Nozzle
Assembling steps are contrary to disassembling ones.
438 Disassembly, Inspection, Maintenance and Assembly of Thrust Plates
4381 Exploded View of Thrust Plates
Upper thrust plate
Lower thrust plate
Fig. 4-30 Exploded view of thrust plates
4382 Steps to Disassemble Thrust Plates
(1) Remove crankcase (refer to section 432);
(2) Remove crankshaft (refer to section 444);
(3) Remove thrust plates (key point 1).
4383 Inspection and Maintenance of Thrust Plates
Key point 1:
Assembling:
Thrust plate should be used in pairs. When assembling, firstly put crankshaft into engine block, and
then install upper thrust plates (without lug). Apply lubricating grease on lower thrust plates and
adhere them on crankcase, and should be assembled together with crankcase. For thrust plates, the