WEICHAI WD10 Service Manual - page 48
Service Manual for WD10 Diesel Engine
38
422 Disassembly, Inspection, Maintenance and Assembly of Cylinder
Cover Shield
4221 Exploded View of Cylinder Cover Shield
Cylinder cover shield
bolt
Cylinder cover
shield
Cylinder cover shield
gasket
Fig. 4-3 Exploded view of cylinder cover shield
4222 Steps to Disassemble Cylinder Cover Shield
(1) Screw off cylinder cover shield bolts orderly;
(2) Pull the shield vertically up to take it and its gaskets down. As shown in Fig. 4-3.
4223 Inspection and Maintenance of Cylinder Cover Shield
(1) Check whether there is damage like crack and severe wear on the shield, a cracked shield must
be replaced.
(2) If there is leakage in cylinder cover shield gasket, then the gaskets should be checked and
replaced, also check the wear condition of cylinder cover upper surface and cover shield
undersurface.
4224 Steps to Assemble Cylinder Cover Shield
(1) Cylinder cover shield gaskets are disposable, and should be replaced during maintenance.