XENO XDR Series Installation And User Manual - page 37
of
112
2) Event
DVR can be set to send event lists to CMS program.
DVR can be set to send event lists to CMS program.
See Chapter 7-9 [5] Event for more details.
- Active : Check checkbox to activate.
- IP address : Shows IP address of the PC, in which event server program runs.
- Port : Shows Port of the PC, in which event server program runs.
Port setup is from 10 to 65000.
-Send Condition : Send information for the selected event to Event server.
Select between Minute and Count.
-Send Interval : Send information either when set time expires or when number of event
reaches set number. (Minute: 1~10 minute / Count: 1, 2, 3, 4, 5, 15, 30, 45, 60)
- Retry Count
: Number of times of retrial (Set from 1~30)
37