XENO XDR Series Installation And User Manual - page 47
2) Event/Panic
Set the event recording quality for each channel.
Set Event/Panic Record Profile.
- The channel with latest EVENT/PANIC will follow setting for ACTIVE and the rest
channels will follow setting for NON ACTIVE.
-RESOLUTION : Set Resolution among NO CHANGE, CIF, 2CIF & D1.
g
,
,
NO CHANGE : Follow same setting for CHANNEL SETUP.
-QUALITY : Set recording quality among NO CHANGE, LOW, NORMAL, HIGH & VERY HIGH.
NO CHANGE : Follow same setting for CHANNEL SETUP.
-FPS: ACTIVE : Set frames per second among NO CHANGE, OFF, 1~30(25).
NO CHANGE : Follow same setting for CHANNEL SETUP.
NON ACTIVE : Set frames per second between OFF and 1.
OFF St
di
OFF: Stop recording.
-When EVENT occurs in several channels simultaneously, channel 1 has the highest priority.
47