XENO XDR Series Installation And User Manual - page 66
8
Easy PTZ control with mouse operation:
With virtual joystick, user can control PAN left/right, TILT up, down with mouse operation.
No.
Button
Function
8
1
2
3
4
5
6
7
No.
Button
Function
1
WIDE
Zoom in
2
TELE
Zoom out
3
NEAR
Focus near
4
FAR
Focus far
5
OPEN
Iris open
6
CLOSE
Iris close
7
EXIT
Exit PTZ control
8
JOYSTICK
PAN/TILT control
[Event Monitoring Setup]
(1) For event monitoring, user must have authority for Schedule and Event.
(Access [Menu]-[System]-[User]-[Authority] and check Schedule and Event)
(2) Access [Menu]-[Record]-[Schedule] to set Recording type for Alarm-In or Motion.
(3) To see setting for event:
- Alarm : [Menu]-[Event]-[Alarm-Out]
7-2. Event Monitoring
- Alarm : [Menu]-[Event]-[Alarm-Out]
- Motion : [Menu]-[Event]-[Motion]-[Action]
- Video Loss :[Menu]-[Event]-[Video Loss]
(4) In case of event, icon for motion or alarm displays on the associated channel if checkbox of
Alarm/Motion Event is checked from [MENU] – [Device] – [Display] – [OSD]:
Motion Alarm
Event monitoring continues for the set dwell-time for event recording and when dwell-time expires it
Event monitoring continues for the set dwell time for event recording and when dwell time expires, it
returns to previous screen.
Set Event Refresh Time for output duration. During this duration, other events will not show.
[Menu]-[Event]-[Alarm]-[Alarm-In] - Duration/Event Refresh Time
[Menu]-[Event]-[Motion]-[Action] - Duration/Event Refresh Time
[Menu]-[Event]-[Video Loss]-[Video Loss] - Duration/Event Refresh Time
Event Refresh Time: Event
output duration
Duration: Recording
time
66