XENO XDR Series Installation And User Manual - page 68
[Record Setup]
(1) F R
d
t h
th it f R
d
7-4. Record
(1) For Record, user must have authority for Record.
(Access [Menu]-[System]-[User]-[Authority] and check Record)
(2) For Continuous record: Access [Menu]-[Record]-[Setup]-[Channel]-[Resolution] and set record
quality settings. If you set FPS to OFF, recording will stop.
For Event/Panic record: Access [Menu]-[Record]-[Setup]-[Event/Panic]-[Resolution] and set record
quality settings.
Overwrite on : When HDD becomes full, it starts recording images over the oldest images.
Overwrite off : When HDD becomes full it stops recording
Overwrite off : When HDD becomes full, it stops recording
Factory default setting for Overwrite is OFF.
In order to enable overwriting function, access [Menu]-[Setup]-[Channel] and check checkbox for
Overwrite.
Record Resolution : D1, 2CIF, CIF
Record quality : User can set quality among 4-steps for each camera channel. Default setting for
quality is “High”.
FPS: OFF 1~30(NTSC) 1~25(PAL)
FPS: OFF 1 30(NTSC), 1 25(PAL)
If NO CHANGE is selected in Event/Panic, it will follow settings on Channel Setup.
The channel with latest Event/Panic will follow setting for ACTIVE and the rest channels will
follow setting for NON ACTIVE.
When cameras are not connected in Live mode, blue screen will display.
When cameras are not recorded in Playback mode, black screen will display.
Press [ALARM]+ channel button to start recording that channel as for Panic recording. Other non-
selected channels will follow settings for NON PANIC.
Press [ALARM] button again to return to schedule recording mode.
Panic recording does not function if Overwrite function is not enabled, or HDD is full.
g
,
Connect audio input device on A IN 1 ~ 4 on the rear panel and speaker on A OUT.
In order to record audio, first select On for all settings on [Menu]-[Device]-[Audio] and check checkboxes
of Record on [Menu]-[Device]-[Audio].
To playback with audio access [Menu] [Device] [Audio] and check Playback checkbox and start x1
7-5. Audio
To playback with audio, access [Menu]-[Device]-[Audio] and check Playback checkbox and start x1
forward playback in full screen mode.
7-6. Search
While in LIVE mode, press search button or click search at MONITORING popup box and search menu
appears as below:
appears as below:
68