XENO XDR Series Installation And User Manual - page 52
of
112
[1] Alarm
5-6. Event
[1] Alarm
1) Alarm-In
Set sensor On / Off and dwell-time for each channel in case external sensor activates.
- No.: Click to display Copy Setting box.
- Type
: Set external sensor input NO/NC/Off for each camera.
- Beep : Set beeping sound On / Off.
- Alarm-Out : Set Alarm-Out On / Off in case sensor input is detected.
- Duration : Set dwell-time from 1 to 99 seconds
- Duration : Set dwell-time from 1 to 99 seconds.
- Event Refresh Time : Set interval time from 1 to 99 seconds.
- Previous : Go to previous channel page.
- Next : Go to next channel page.
*N.O = Normal Open Type
*N.C = Normal Close Type
52