XENO XDR Series Installation And User Manual - page 55
of
112
Motion Mask Zone setup window
Activates Motion
Deactivates Motion
Detection
Motion Mask Zone setup window
Detection
- Cell Setup
Click left button of mouse to set Motion Mask Zone by selecting or clearing blocks.
- Block Setup
Click selected cell and drag it to desired position All cells within the block will be selected
Click selected cell and drag it to desired position. All cells within the block will be selected.
Select: Deactivate motion detection.
Clear: Activate motion detection.
Reverse: Activate inactive blocks and deactivate active blocks.
- Click OK on the popup menu to save setting and exit.
55