XENO XDR Series Installation And User Manual - page 56
of
112
2) Action
Set Alarm-Out On / Off for each channel in case motion is detected.
- No.: Click to display Copy Setting box.
[3] Video Loss
- Alarm-Out : Set On / Off for sending alarm signal to relay output terminal.
- Duration : Set alarm dwell-time from 1 to 99 seconds.
- Event Refresh Time : Set interval from 1 to 99.
Setup reacting to video loss for each camera
- No.: Click to display Copy Setting box.
- Beep : Beep On/Off in case of Video loss.
- Alarm-Out : Send signal via Relay Out terminal.
- Duration : dwell-time from 1 to 99 seconds.
- Event Refresh Time : Set interval from 1 to 99.
56