Xerox 6100BD - Phaser Color Laser Printer Getting Started - page 23
Caveat
Applicable printer product
Copy-Sensitive CME jobs print with extra
pages.
Avoidance: Program a Copy-Sensitive CME in
the START JDL, even if it is a CME
CONSTANT to print a space. The output
prints correctly.
All monochrome printers
Long jobs that are simplex with a solid
highlight color image in the same location on
each page may cause staining on the fuser
that appears on subsequent jobs. Contact the
Xerox customer support center for assistance.
DocuTech 180/155/128 HLC
Jobs programmed with front covers do not
print.
Avoid programming front covers at this time.
DocuTech 180/155/128 HLC
Programming a negative shift with JIS B4
stock causes a misalignment between the
black and highlight color images.
DocuTech 180/155/128 HLC
Use of DHCP is not recommended. Assign a
static IP address for the system.
DocuTech 180/155/128 HLC
DocuSP Remote Workflow does not run in the
Solaris operating system. Use Remote
Workflow on a Windows platform only.
DocuTech 180/155/128 HLC
Mismatch processing for highlight color
printing is not supported for IPDS. When
performing highlight color printing, the IPDS
decomposer always prints in the loaded color.
In addition, transparent highlight color mode is
not supported.
DocuTech 180/155/128 HLC
Restarting DocuSP causes Remote Services
to restart. Do not restart DocuSP while
capturing or transferring data.
DocuTech 180/155/128 HLC
A C17-350 fault occurs when the system
attempts to backup the billing meter
information when the printer is switched off.
Switch on the printer and restart the DocuSP
software to clear the error.
DocuTech 61xx
The DocuSP 4.x UI functions much slower on
an Sun Ultra 2.
DocuTech 61xx
In Printers, Stackers, if a selection is made for
All Stackers, the selection is not modified for
all. Select each stacker individually and make
the necessary change.
DocuPrint 1xx EPS
The Reposition Output display only shows the
end of the job and does not show the end of
the set.
DocuPrint 1xx EPS
19