Xerox 6100BD - Phaser Color Laser Printer System Manual - Pcl Paper Source Command

4 - 4

System Guide

Finishing

PCL paper source command

Use the PCL Paper Source command  to program a 

PCL print job to use a specific paper. The PCL decomposer on the 

Xerox FreeFlow Print Server Controller reads the paper source 

command and, using the PCL Paper Sources option in the Queue 

Properties and maps the command to the appropriate paper. The 

number code corresponds to the following PCL Paper Source 

programmed in Queue Properties.

To program the PCL Paper Source, use the following guidelines:

Standard:

 &11H

Manual Paper Feed:

 &13H

Manual Envelope Feed:

 &13H

Lower:

 &14H

Large Capacity:

 &15H

Envelope Feed:

 &16H

Tray programming

Tray confirmation

Tray confirmation selections control:

•

whether a confirmation pop-up window appears on the 

screen after a tray has been opened and closed

•

what attributes are assigned to that tray

•

whether the action is automatic or requires user action to 

confirm the programming change

To set tray programming options, perform the following:

1.

On the main menu select [Setup]

2.

Select [System Preferences]

3.

Select the [Stocks and Trays] tab

Settings are system-wide and are applied immediately. No restart 

of the Xerox FreeFlow Print Server software required.